Price range: $19.99 through $219.99
Pool Patch® Pool Tile Grout Repair Kit is composed of our waterproof Portland cement-based grout specifically designed to minimize the discoloring effects caused by chemicals used in pool maintenance. Each kit contains an acrylic-polymer latex admixture for a superior grout that offers ease of workability and clean-up, rapid cure, high compressive strength, low shrinkage, and excellent bond strength.
Perfect for filling in grout voids and grouting brand-new swimming pool tiles. Designed for ceramic, glass, or porcelain swimming pool waterline and cap tiles.
Our pool tile grout includes specially graded silica and colorfast pigments that form a dense matrix.
Available in Gray and White
Available in 1.5lb. 3 lb. 10 lb. 25lb. and 50 lb. sizes
1. Lower pool water 4” below the tile repair area.
2. Remove existing loose material and grout.
3. Add 2 oz. of LIQUID CEMENT BONDER per 11⁄2 lb. of DRY POOL PATCH GROUT MIX. Add water and mix until a putty consistency is achieved.
4. Apply GROUT MIX filling in the pool tile area to be grouted and allow to dry for 5 minutes.
5. Use a damp sponge and lightly wipe off excess pool tile grout to a smooth joint.
6. Allow to dry for 2 hours then wipe off remaining film with a dry soft cloth.
ALLOW TO CURE 4 HOURS BEFORE FILLING POOL
WARNING: Contains Cement, an Alkaline substance irritating to eyes and skin. Contains Acrylic Resin Cement Bonder. Should product contact eyes, flush them immediately and repeatedly with water and call a Physician. DO NOT TAKE INTERNALLY. In case of skin contact, rinse immediately with water. USE OF RUBBER GLOVES AND EYE PROTECTION IS RECOMMENDED.
KEEP OUT OF REACH OF CHILDREN
1.5lb Covers Appx. 5 Sq. Ft.
(@ 1/4″ Depth)
3lb Covers Appx. 10 Sq. Ft.
(@ 1/4″ Depth)
10lb Covers Appx. 30 Sq. Ft.
(@ 1/4″ Depth)
25lb Covers Appx. 75 Sq. Ft.
(@ 1/4″ Depth)
50lb Covers Appx. 150 Sq. Ft.
(@ 1/4″ Depth)
